DM800 clone и mgcamd

[миро86]

След няколкочасова мъка се предавам и искам помощ за подкарването. Версията е 1.38 за OpenPLI от ъплоуда - http://dtv-bg.com/downloads.php?do=file&id=4069. Линията е от заргата, конфига е следния:

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }

# *** update (sum 01 or 02 with 04)
# 01 update only new ****, default setting
# 02 update all **** (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/****
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 means CCcam or NewCamd client

G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 15

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 300 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm **** update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.*** on channel change
# 04 reread SoftCam.*** if file changed
R: { 07 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 16 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2/alien NewCamd client
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 11 ipbox/********/alien CCcam client
# 12 Fortis
B: { 01 }

# urls for aes **** update, any number or urls allowed,
# url data must contain *** in format 0500:007C00:0000000000:00:key1:keyl
# W: { http://some.host.com/****.php }
F: {00}

Моля който може да помага.

[martinakis]

Ползвай оскам

[Васил]

пробвай с други варианти на В: напр 00 и 06.Нюкамдлист как изглежда.

[миро86]

Първоначално написано от martinakis

Ползвай оскам

Конфига ми е сложен при него, би ли ми дал един примерен, който да чете от mgcamd, аз се справих само с сссам линия:

[reader]
label = CCcam
enable=1
protocol = cccam
device = socialcs.dyndns.tv,20200
account = account
password = password
caid =
lb_weight = 100
cccversion = 2.2.1
services =
inac****tytimeout = 1
fallback = 1
caid =
ident =
group = 1
ecmcache = 1
lb_weight = 100

[миро86]

Първоначално написано от Васил

пробвай с други варианти на В: напр 00 и 06.Нюкамдлист как изглежда.

newcamd e:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = de156.cserver.tv 3031 account password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Bulsatcom 39.0°E
CWS = de156.cserver.tv 3040 account password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Bulsatcom 39.0°E

[themaster301]

Сложи моито:

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# *** update (sum 01 or 02 with 04)
# 01 update only new ****, default setting
# 02 update all **** (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/****
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm **** update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.*** on channel change
# 04 reread SoftCam.*** if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

[миро86]

Първоначално написано от themaster301

Сложи моито:

никаква промяна:
кажи ми папките ми дали са наред че това ме притеснява:
var-bin e mgcamd с chmod 755
var-**** е mg_cfg
etc-tuxbox-config са ми newcamd.conf и newcamd.list

[themaster301]

Първоначално написано от миро86

никаква промяна:
кажи ми папките ми дали са наред че това ме притеснява:
var-bin e mgcamd с chmod 755
var-**** е mg_cfg
etc-tuxbox-config са ми newcamd.conf и newcamd.list

Постави newcamd.conf , newcamd.list и mg_cfg в usr/****.

[Васил]

var-bin -кей и там са вс папки. Не съм сигурен ,че отдавна не ползвам Дриима.

[dzumba]

Няма как да тръгне,няма библиотека!