The Best Streaming Software!
VIVO Rent A Car - Your car rental
Върни се   Digital TV Forums - БЪЛГАРСКИЯТ ФОРУМ ЗА ЦИФРОВА ТЕЛЕВИЗИЯ > Шеринг и емулатори > Емулатори > Gbox

Отговори
 
Контрол над темата Начин на разглеждане
  #1  
Стар 09-11-2009
Аватара на ТИНТИН
ТИНТИН ТИНТИН не е на линия
Модератор
 

Дата на присъединяване: Mar 2009
Мнения: 4,148
Благодари: 362
Получил благодарност:
2,431 пъти в 1,521 поста
Сваляния: 71
Ъплоуди: 0
По подразбиране G-box енциклопедия ( king of emulator)

Едно интересно виждане на колегата satworld от един друг форум за емулаторат Gbox.


This description was based on my experience with this emu and
free translation of the readme author
This is not the final version and will be further updated
Gbox is:
- An emulator for the system: ******, Seca, ********, Nagravision, *****, Cryptoworks.
- Season emulator for ****** Cam.
- Softcam: ******, Seca, ********, Nagravision, *****, Cryptoworks, ***.
- Multipid logger: logging while multiple ECM and EMM
- Card-sharing client and server (peer to peer) locally and via the internet.
- GSMS Messageing system (sending a text message with the tuner to a receiver).
How to install Gbox in tuner with Linux:
Gbox.ppc install the file in var / bin possibly dbox neutrino var / emus and change
attribute to 755
Gbox_cfg files, crypto, *****, ******, Nagra, ***, seca, via, cwshare.cfg, softcam.cfg,
ignore.list, ident.info, s2issuer.b, s2provid.b, and all the files from the nagra.rom
var / keys
In order to use sharingu should redirect the UDP port on the router so how ustailismy in
cwshare.cfg, and if we also share our cards plugged into the port is cs2gbox
also need to redirect.
Gbox also allows the redirection of card-based server to server newcamd
Gbox server with cs2gbox.
Cs2gbox.ppc install the file in var / bin or var / emus and change the attribute to 755 and the file
cs2gbox.cfg to var / keys
For this we set up a script that we odpali emulator but it already depends on the
What image we have.
Gbox how to configure:
In order to make the emulator started it first be properly set up and do it in
File gbox_cfg
Trace / Debug
# Xx yz; xx = 00 does not save the console
# Xx yz; xx = 01 saves on the console
# Xx yz, y = 0 debug off
# Xx yz, y = 1 debug enabled
# Xx yz, z = 0 never write
# Xx yz, z = 1 write in / var / tmp / debug.txt
# Xx yz; with = 2 writes the UDP port (can be redirected to login, for example, UDP port
PC)
From: (01 10) 10.0.0.2 8024
Type of task
# 00 ** normal mode Gbox (no season, with the use of Multicam)
# 01 ** Season Simulation in ****** allcam chid 0602
# 10 ** Season Simulation in ****** allcam chid 1702
# 11 ** Season Simulation in ****** allcam chid 1702 Z
# 12 ** Season Simulation in ****** allcam chid 1722 Z
# 13 ** Season Simulation in ****** allcam chid 1762 Z
# ** * 1 Com port in the simulation uŜyty Season (1 or 2)
# ** 0 * UŜyj for detecting CTS RTS
# ** 1 * UŜyj DCD for the detection of RTS
# ** ** 9600 = Baudrate uŜyj (only dbox2)
In: (00 00) 9600
Working Gbox
# 00 Emus
# 01 SoftCam (when card in the slot), Emu (when no card slot)
# 02 Customer Internet
# 03 all options !!!!! always used this option !!!!!
G: (03)
Display ECM messages on the console
# 00 does not show the ECM
# 01 show only valid ECM
# 02 show valid and bad ECM with a complete illustration of the data
C: (00)
Display EMM messages on the console
# * 0 do not show EMM
# * 1 show only valid EMM
# * 2 show valid and bad EMM with a complete illustration of the data
# 1 * log change for p ***** re Word for Nagra provider for 17xx
/ var / keys / pwupdate.log
M: (00)
AutoUpdate
# 00 is ignored
# 01 included in the AU
# 02 Auto AU included !!!!! always used this !!!!!
A: (02)
Update key
# 01 update only new keys
# 02 updates the keys
U: (01)
Hash pidów
# 00 decodes all pidy not used this setting (it is only for testing purposes)
# 01 decodes only pidy which algorithms and keys are known, always use this option!
H: (01)
Path to file with the keys
# 00 keys in / var / keys
# 01 keys in / var / tmp
T: (00)
Viewing card information contained in multicamie pinned under com1/com2
# 00 off display
# 01 display information on the card for the neutrino
# 02 display information on the card for the neutrino in the new format nhttpd
# 03 display information on the card for Enigma
A: (00) 10.0.0.2
Login using UDP port
# 00 seen off
# 01 login enabled (IP / UDP)
L: (00) 10.0.0.2 8017
Configuration readers
# * X **, x = number uŜytego device (0 = sloppy)
# D * **; use of voltage / proc / bus / GTX for CW operation of writing (in the dbox2 Gbox by
CW directly, 00 is the recommended mode! Drivers are not required) The use D * **
Only when we have a problem
# F * **; write the CW boxach processor with STB04xxx and uŜywających PVR
# ** Y *, y = 0001b (0x1 *) uŜyj slot1 as Multicam (only STB04xxx)
# ** Y *, y = 0010b (0x2 *) uŜyj slot2 as Multicam (only STB04xxx)
# ** Y *, y = 0011b (0x3 *) uŜyj slot1 and slot2 as Multicam (only STB04xxx)
# ** * Z, z = 0001b (0x * 1) uŜyj com1 as Multicam
# ** * Z, z = 0010b (0x * 2) uŜyj com2 as Multicam
# ** * Z, z = 0011b (0x * 3) uŜyj com1 and com2 as Multicam
# ** Yz, yz = 00110011b (0x33) uŜyj slot1 + slot2 + com1 + com2 as Multicam
# ** * Z, z = 0100b (0x * 4) reverse CTS detection on com1
# ** * Z, z = 1000B (0x * 8) turn away CTS detection on com2
# Example: yz = 0x0A = 00001010 (uŜyj com2 with inverted CTS detection line)
V: (F0 35)
Additional options konfiuracji Gbox:
RS232 SSSP mode
P # (xy)
# X debug messages, 1 = enabled, 0 = off
# S use a COM port (0 = off, 1 = com1, 2 = com2)
R: (12)
Ways to save cpu, api, cw
# J: (01 00 00 01 01)
# Where:
# 00 car
# 01 80x86
# 02 MPC823
# 03 IBM STB04xxx
# 00 car
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = uŜyj only internal procedures (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte / proc / bus / GTX
# 05 cw write style = 4096 byte / proc / bus / GTX, cw offset = 0x04D0
# Xx write cw in 1st device with index = xx
# Yy write cw in 2nd device with index = yy
# 01 of the index is equal to 0 (default)
# 02 of the index is equal to 1
# 03 is the index of 0 and 1
# .. Sample connection bit ...
# FF means with all eight indices (0-7)
An example of how through the line J can fire up Gbox on Relooku:
# J: (03 02 02 01 01)
Files, folders, devices, here we give no standard path to the settings
#
# F: (01) / var / tmp / pmt.tmp / / path to the folder pmt
# F: (02) / var / tmp / emm.info / / path to folder, logon emm
# F: (03) / var / tmp / ecm.info / / path to file ecm.info
# F: (04) / var / tmp / atack.txt / / path to file atack.txt
# F: (11) / var / keys / / folder path to the configami
# F: (12) / var / tmp / / tmp path to a folder
# F: (13) / var / tmp / / path to the folder with the keys to the tmp
# F: (21) / dev/dvb/adapter0/ca0 / / ca device
# F: (22) / dev/dvb/adapter0/dvr0 / dvr device
# F: (23) / dev/dvb/adapter0/demux0 / / demux device
# F: (31) / dev/dvb/adapter0/ca1 / / second ca device cw recorder (recording)
# F: (41) / dev/sci0 / STB04xxx slot1
# F: (42) / dev/sci1 / STB04xxx slot2
# F: (43) / dev/tts/0 / / rs232 com1
# F: (44) / dev/tts/1 / / rs232 com2
for example, if you want to put a card reader on the outside should be in addition to the
gbox_cfg in the line # V: (xx) x5 voltage to rs232 here and must be provided to the path
namely:
# F: (43)
Force to change the name to `a season or a device plugged into the RS232 SSSP
# F: (45) / dev/ttyS1
By default, the card works at frequencies 3.579 MHz and 6 MHz, Gbox should
automatically detect what type of card dealing. However, if there are problems with
running some cards should try to overclock it by poniŜszych options:
# 1 = 7.80MHz 2 = 6.30MHz 3 = 5.25MHz 4 = 4.50MHz 5 = 3.94MHz 6 = 3.50MHz 7 = 3.15MHz
# F: (51) 02 / / ******
# F: (52) 03 / / seca
# F: (53) 03 / / ********
# F: (54) 03 / / nagra
# F: (55) 03 / / crypto
# F: (57) 03 / / *****
# F: (58) 03 / / ***
Those who want to overclock the card, for example, figures, should be the provider and odhaszować
possibly change the value of the buckle:
F: (52) 03
Cards operating in the frequency of 6 MHz are working 68% faster and more stable. Can only
a problem with the card Nagra (ROM 11)
IMPORTANT:
According to the experiences of colleagues with Polsat Cyfrowy card to card
work properly it must be overclocked by poniŜszego example:
F: (54) 03
Option pinging our server for others to see whether they are online (time
given in seconds):
F: (A0) 300
Disable direct access to the serial port on i86 platforms
Direct access is used to the unusual speed settings if you want to 3.57 MHz
6 MHz in the reader ...
A1 = 0 - this is a standard setting
# A1 = 1 - used only if we have problems with ioperm or want to hook the reader
adapter card into the usb-rs232
# F: (A1) 0
Gbox sharing on:
Sharing or sharing in the cards Gbox is via file cwshare.cfg (important
to have the external IP, or ask the administrator of our network to redirect our
Tuner a UDP port)
For there was a connection between the entry is necessary peerami lines M: and D:
Line of M: it consists of our domain name and password separated clasps (attention should be paid
breaks):
M: (serwer.dyndns.info 1234ABCD ())
Even if we have to recommend using the IP domain, because when you type in the IP
line M: This will not be seen Gbox peers who have domain lines D:
A password and any records in the Gbox is done by using HEX namely: 0, 1, 2, 3, 4, 5, 6, 7,
8, 9, A, B, C, D, E, F password create yourself.
Ruler C: consists of a domain name or IP of the Peer attach, ports, passwords, and Peer
powers that we give him (level)
D: (domain (port1 port2 (password (level1 level2))))
# PEER 1
D: (peer1.no-ip.info (2233 4455 (3412CDAB (3 3))))
PEER # 2
D: (195.354.123.23 (2233 1111 (0123BCDE (A3 A3))))
# The local box
D: (192.168.0.5 (2233 3322 (FE32BCA6 (A1 A1))))
As shown in line D: we can enter the IP, as one of the peers has a fixed but it must have
line M: domain
Port1 defines the UDP port, which is piped to our box
Port2 is the port the UDP which redirect to its peer box
Password in Config can not be repeated because we leap fatal error
Level1 determines the number of levels that we peerowi to be able to send more cards, which
we have slots
Level2 defines the number of levels that we peerowi to be able to send more cards, which themselves
sharujemy
The letter A Levels before you can send sharingu *** cards and packages BskyB
SkyItalia
Adequately to record our PEER 1 will have a record of cwshare.cfg:
M: (peer1.no-ip.info 3412CDAB ())
D: (4455 2233 (serwer.dyndns.info 1234ABCD ((3 2))))
A PEER 2:
M: peer2.ath.cx (()) 0123BCDE
D: (serwer.dyndns.info (1111 2233 (1234ABCD (A3 A3))))
And the local box:
M: (192.168.0.5 ()) FE32BCA6
D: (192.168.0.4 (3322 2233 (1234ABCD (1 1))))
Ruler sharingu configuration is N:
N: (00 01 03 00 4000 6000)
Where:
00 - considering every EMM only once
01 - repeat EMM
01 - resume pid
1 * - reset ENX on every channel change
* 1 - check / reset ENX freezes the image on the Clear
* 2 - check / reset ENX freezes the image on the channel paid
* 3 - check / reset ENX freezes on the image and Clear Channel paid
00 - do not write anything in atack.txt
01 - Write on atack.txt if the password is wrong
02 - Write on atack.txt when the ID is unknown
04 - Write on atack.txt when IP is bad
08 - Write on atack.txt when the port is bad
10 - Write on atack.txt share.stat
20 - Create your online.log where deposits are connecting and disconnecting peers in our
Server
3F - print all
4000 - ask a question again about the ECM after 4 seconds when not getting answers
6000 - will again try to decode after 6 seconds if no decode the first
together
The next parameter is X, which determines how many cards from one provider to SLAC Gbox
Question of the ECM
X: (A) means that Gbox be sent urgent requests to 10 cards with each provider
Another parameter is I:, which determines how many levels is to send forth Gbox requests ECM
I: (2) means that Gbox requests will be despatched to the ECM, only cards that are up to
the second level
Parameters X and I: determine the number of cards on the server where the limit is 1024 card (if
we exceed this value to the Gbox may become unstable)
Gbox also enables the favoring of certain cards and their ignoracje. To serve this
parameters of G: and Y: in file cwshare.cfg
Parameter G: allows you to enter any number of cards from the provider and will not
limited parameter X:
Allows us to identify cards, which go full Gbox packages and will be favored and
saw the first script regardless of what level they go (to a level which
And we set the parameter
example, entering our native platforms papers
# Digit +
G: (01000065 XXXX)
# Phat
G: (18017001 XXXX)
# Tvn
G: (0B000000 XXXX)
where XXXX is the ID Box, which has these cards in slots
also if you have a piece of suspicious that it could be just typing wyignorować
ID Box, which holds that slot in your card
Y: (XX)
where XX XX is the ID models supported
In addition, the card can indicate the slot located in the pidy and sidy is to decode
of our cards with the parameters: and S:
W: (0A 0B 0C) where:
A - number of slot in which the card
B - data of the owner of the card:
0 - card not be used
1 - card used all pidy
2 - card used following pidy
C - data users in the network
0 - not be used in our cards
1 - allow all used pidów
2 - The use permit following pidów
Sample entry:
In: (01 01 02) 06A5 06aDE, which tells us that the card slot in which we first
owner uses all pidów but users of the network can only use the pidów
06A5 (HBO) and 06aDE (HBO2)
Record W: (01 01 02) 1FFF sets all of the cards pidy
Similarly, we do an entry for the parameter S:
S: (0A 0B 0C)
where:
A - number of slot in which the card
B - data of the owner of the card:
0 - card not be used
1 - card used all sidy
2 - card used following sidy
C - data users in the network
0 - not be used in our cards
1 - allow all used sidów
2 - The use permit following sidów
slots in Gbox define as follows:
01 - slot 1
02 - Slot 2
03 - com1 card1
...
10 - com1 card8
11 - com2 card1
18 - com2 card8
Gbox sharing on the use of server-based protocol Newcamd
As you know, not all packages can still sharować Gbox network without problems,
example is our chociaŜby Poland Cyfrowy Polsat platform. Used for this purpose
cs2gbox, as the name suggests the CardSerwera to Gbox.
In order not to paste the entire Config posłuŜę a scrapbook with cardserwera which is NewCS:
<parity> odd </ parity>
<export> yes </ export>
<enabled> yes </ enabled>
<blocksa> No </ blocks>
<blockua> No </ blockua>
<blockga> No </ blockga>
<boxkey> 0000000000 </ boxkey> <PTShandshake> no </ PTShandshake>
<crypto-special> no </ crypto-special>
<carddetect> no </ carddetect>
<newcamd_port> 10,645 </ newcamd_port>
It is important for Polsat cards (and other users of the system Nagravision) to enter the boxkey
red box
We then create an account for yourself:
<newcamdserver>
<enabled> yes </ enabled>
<name> cardserver </ name>
<deskey> 01 02 03 04 05 06 07 08 09 10 11 12 13 14 </ DESKEY>
<userfile> </ userfile>
<user>
<name> user </ name>
<password> dummy </ password>
<au> on </ au>
</ user>
<user>
<name> hiszpan </ name>
<password> dummy </ password>
<au> on </ au>
</ user>
</ newcamdserver>
Newcs.xml configured correctly placed in the tuner in / var / tuxbox / config
Then we set up a file that cs2gbox.cfg placed in / var / keys
Binaries, of course, put in / var / bin and we give the attributes of 755
Configuration cs2gbox.cfg looks very much like a file cwshare.cfg:
M: (serwer.dyndns.info DCCB6554 ())
if we send forth to the network card that can be in M: enter the IP wewętrzne tuner that is in
this case: 192.168.0.2
Peerzy connecting directly into the card cs2gbox see included in the line C: the distance of 1
It is important that the level cs2gbox consisted only of numbers (the letter A is permeable ***
applicable only in cwshare)
D: (peer1.no-ip.info (2230 4455 (3412CDAB (3 3)))) # colleague netu
D: (195.354.123.23 (2230 1111 (0123BCDE (3 3)))) # colleague netu
D: (192.168.0.5 (2230 3322 (FE32BCA6 (1 1)))) # our second local box
D: (192.168.0.2 (2230 2233 (1234ABCD (5 5)))) # box on our server, and where we
cs2gbox
C: (phat 192.168.0.2 10645 user dummy 12000 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Отговори с цитат
Следните потребители (2) благодарят на ТИНТИН за този полезен пост
thunderstorm6 (09-11-2009), Ники (09-11-2009)
  #2  
Стар 09-11-2009
Аватара на ТИНТИН
ТИНТИН ТИНТИН не е на линия
Модератор
 

Дата на присъединяване: Mar 2009
Мнения: 4,148
Благодари: 362
Получил благодарност:
2,431 пъти в 1,521 поста
Сваляния: 71
Ъплоуди: 0
По подразбиране

) # Carta from our server
C: (cabo hiszpan.dyndns.info 10,015 roberto england 12000 01 02 03 04 05 06 07 08 09 10
11 12 13 14) # card from a friend in spain
And finally type in your cwshare.cfg:
M: (serwer.dyndns.info 1234ABCD ())
D: (peer1.no-ip.info (2233 4455 (3412CDAB (3 3))))
D: (195.354.123.23 (2233 1111 (0123BCDE (A3 A3))))
D: (192.168.0.5 (2233 3322 (FE32BCA6 (A1 A1))))
# Cs2gbox
D: (192.168.0.2 (2233 2230 (DCCB6554 (1 1))))
It is important that the script first started taking off emu or NewCS server, then
cs2gbox and at the end Gbox
It is recommended that you disable the reader, who receives Emu Gbox NewCS and do it in the gbox_cfg
line V:
In cs2gbox we have the opportunity a few settings using the parameter Q:
Q: (01 00 01 00 01 01 01 30 05 3600 05 360 360 1)
where:
00 - does not write information and errors
01 - writes information and error
00 - do not write connections to the server
01 - by connection to the server
00 - not by ECM
01 - by ECM
00 - not by CW
01 - by CW
01 - immediately try to reconnect after losing connection
01 - write on the screen
01 - write in debug.txt
30 - corresponds again after 30 seconds
05 - if you are not successful try after 5 seconds (try only once)
3600 - attempt to connect to the server, not combined every hour (3600 seconds)
05 - the minimum interval between the time attempting to log on
360 - keep the Internet at life through 360 seconds
360 - Ping to cardserwera after 360 seconds after the last ac****ty to keep him
Online
1 - end connection
In cs2gbox providers can also be ignored
whole for all systems except ********:
I: (01 00 00 68) - inactive provider Digits
or individual packages in ********:
I: (05 02 0A 10) - HRT Basic package
Gbox sharing on the use of season'a:
According to the author is Possible Gbox sharing protocol using season'a. (Pure
theory - not proven)
To accomplish this should change the parameter: the gbox_conf
In: (01) XX
Where:
XX - COM port to which is attached Season
Server can be both your computer and dbox, dreambox.
This may be a bad alternative for HDTV with a sort of universal module, because
Those on Linux somehow can not wait to release their ...
With this theme waiting for the season to see this in practice, as the desire to include in
the next update of this FAQ ...
Softcam.cfg
Save data EMM
# 00 does not save anything
# 01 writes processed Emm (/ var / tmp / emmproc.bin)
# 02 saves rejected Emm (/ var / tmp / emmblock.bin)
# 03 saves two EMMY
L: (00)
Checking additional frequencies OSC! dbox only!
# 00 does not check
#> 0 Check on in KHz, example 8MHz = 08,000
F: (0000)
Checking for additional Baurate ATR! only for dbox2!
# 00 does not check
#> 0 Check on in bit / s, for example 81,861
B: (0000)
Enable Support TPScrypt
# * 0 TPScrypt off
# * 1 TPScrypt included
# 1 * not used the PTS on ******** cards
# 2 * not be used on cards Cryptoworks PTS
# 3 * not be used for the PTS ******** and Cryptoworks cards
Y: (01)
RS232 buffer before writing
# 00 do not delete
# 01 delete buffer
E: (01)
SoftCam Blocker in Gbox
#
I: (00 00 00) ****** All SA UA
V: (00 00 00) Via - SA UA
S: (00 00 00) Seca - SA UA
N: (00 00 00) Nagra All SA UA
C: (00 00 00) Crypto All SA UA
A: (00 00 00) ***** - SA UA
D: (00 00 00) *** All SA UA
namely:
00 - block EMM off going to the card
01 - block EMM included going to the card
and an example card irdetto:
I: (All SA UA)
where:
ALL - blocking all card
SA - are passed EMM-y, which go to the group to which we must be cards
UA - are passed EMM-y, which go to the serial number
To enable the blocker to the card Seca should edit the parameter S: (00 01 01)
Definitions Timeout (waiting time)
T: (00 02 01) ATR timeout on the card (normal * X), time to wait for INS
(normal * X)
com1/com2 delays, all the delay serve a preliminary decimal (DEC)!
All synchronization should be 0, change only if we have a
concern.
T: (01 00000 000) ******: bytes delay (1e-6 s), instruction delay (1e-3 s)
T: (02 00000 000) Seca
T: (03 00000 000) ********
T: (04 00000 000) Nagra
T: (05 00000 000) Cryptoworks
T: (06 00000 000) Geldkarte
T: (07 00000 000) *****
T: (08 00000 000) ***
T: (09 00500 000) Dreamcrypt / Firecrypt
When the problem of firing Cyfrowy Polsat cards should change the parameter of delay for
Nagry on:
T: (04 00000 010) Nagra
Use of a bug in Cryptoworks cards to decode any CW, regardless of chid
(chanel ident)
Cxxx configuration (enabled only for the provider, whose line is present in the configuration)
(use of ECM in order to obtain the cw Cxxx)
# Digiturk
8: (C1) A4 4C 00 00 31 28 00 2E 83 01 C1 8C 03 89 19 19 8E 02 00 00 8F 01 A9 91 01 55
DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
where:
C1 - provider
19 19 - chid who is currently on the card this provider
Keys constant that is based on constant CW
# 0: (00 00 01 62 (00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF)
where:
00 00 This caid
01 62 a sid
00 11 22 33 44 55 66 77 is cw0
88 99 AA BB CC DD EE FF is CW1
Also in this form write keys biss coded system, which benefit from
two identical solid cw
Sample key for SCT Extra
0: (05 00 36 B3 (9D B6, C9-1C 9C E1 D3 50 45 E3 15 3D 36 2E 35 99)
Emulation card - use it only when we have access to private
keys, we can not give them but want to somehow divide them
Sample simulation 007C00 card in slot 1, if you have private keys for that
Platforms
M: (01 (05 00 7C 00))
Simulation of the 4801 card slot 12 (com2, slot2) if you have private keys for that
Platforms
M: (0C (18 01 48 01))
Keys to Gbox:
Crypto (0DXX):
Cryptoworks keys system are saved in a file and share the Crypto Key, OP, RSA
modular System:
OP key save in the form:
K: (0D CE AN ID XX YY (ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
0D XX - provider
CE AA - type of key
ID - ID provider
YY - key number
ZZ - the key consisting of 16 bytes
Distinguished by 4 types of key:
TYPE: CE20 ECM Key
TYPE: CE21 EMM-S Key
TYPE: CE30 EMM-G Key
TYPE: CE20 EMM-C Key
Example:
Keys which have such a provision SoftCam.Key:
In 0D03C0 00 02A2ED9B9E14776D87ECBF3BFE66278F - ECM key 00
In 0D03C0 01 B741ED569EA549478BA4740FC633272B - ECM 01 key
In 0D03C0 80 B752C3BE0BDEEB8A32A3E73E6358F044 - EMM-G 00 Key
In 0D03C0 81 28E3AF36BBC2BC92407DAAC238D12ADF - EMM-G 01 Key
The file is written in the form of crypto:
K: (0D 03 CE 20 C0 00 (02 A2 ED 9B 9E 14 77 6D 87 EC BF 3B FE 66 27 8F))
K: (0D 03 CE 20 C0 01 (B7 41 ED 56 9E A5 49 47 8B A4 74 0F C6 33 27 2B))
K: (0D 03 CE 30 C0 00 (B7 52 C3 BE 0B ED EB 8A 32 A3 E7 3E 63 58 F0 44))
K: (0D 03 CE 30 C0 01 (28 E3 AF C2 BB 36 CB 92 40 7D AA C2 38 D1 2A DF))
RSA is written in modular form:
R: ((ID 0D XX ZZ ZZ ZZ ZZ ...))
Where:
0D XX - provider
ID - ID provider
ZZ - RSA modular, consisting of 64 bytes
Example:
Keys which have such a provision SoftCam.Key:
In 0D03C0 B0 39FA13 ... ... ...
The file is written in the form of crypto:
R: (0D 03 C0 (39 FA 13 ... ...))
The system key is written in the form:
S: 0D XX ((ID ID ID ID (ZZ ZZ ZZ ZZ ZZ ZZ)))
Where:
0D XX - provider
ID - ID of the provider (here Seby not repeat all the key type
IDs as they are known to scratch or leave
ZZ - the key system consisting of 6 bytes
Example:
Keys, which in May SoftCam.Key the words:
In 0D01E4 06 C23FFA9219AB
In 0D01E8 06 C23FFA9219AB
In Crypto save file:
S: (0D 01 (E4 E8 00 00 (C2 3F FA 92 19 AB)))
Nagra (1800, 1801):
Boxkey:
As one of many security system will record a, the evaporation of the tuner card via
boxkey'a. In order to make the card run Nagra, unfortunately we have to try to pull some data
the tuner.
The letter is identified Boxkey B: and write it to a file recorded in the following form:
B (ir ir ir ir (bk bk bk bk bk bk bk bk))
Where:
ir - IRD card, it can be read from the card by inserting the card into the reader, having run
Gbox emulator of entry: AU: 0x IR IR IR IR
bk - boxkey
So for example:
Cam ident: AU: 0x3C529FAE
B: (3C 52 9F AE (82 F3 8C E4 AC BA C0 21))
More secure identification cards still require the RSA consists of 64
bytes that enter the brackets:
B (ir ir ir ir (bk bk bk bk bk bk bk bk)) RS RS RS RS .........
So for example:
B: (3C 52 9F AE (82 F3 8C E4 AC BA C0 21))
16B4AE7892FF3E2782947482927363838264AE7892FF3E2716 B4AE7892FF3E2716B4AE7
892FF3E2716B4AE7892FF3E2716B4AE7892FF3E2716B4AE789 2FF3E27
Nagra 1 (1800):
System keys are identified Nagra 1 The letter N: and are recorded in the following
Format:
N: ((XX YY ZZ ZZ ZZ ... ...))
Where:
XX - the provider
YY - key number
ZZ - the key consisting of 8 bytes
Example:
N: (48 01 00 (ca 26 3c c0 60 a4 50 d0)) - a key 00 for TV Cabo
N: (70 01 01 (4 de 2e 51 c1 f4 67 8b)) - a key 01 for Polsat Cyfrowy
Nagra 2 (1801):
The keys of Nagra 2 to version 2.1c The letter was identified in 2: and were saved in
the following format:
# 2: ((YY XX YY ... ... ... (ZZ ZZ ZZ ... ...)))
Where:
XX - the provider
YY - ideakey consisting of 16 bytes
ZZ - rsakey consisting of 64 bytes
Example:
2: (41 01 (F5 36 55 68 F5 46 63 32 52 EE D5 00 88 1E 5A 37 (D9 1F B4 82 F5 4C 45 35
62 1D 84 5F 7E C4 AB 4D C9 30 9D ED 26 B5 40 30 84 8E B6 39 68 97 75 29 FE 8F F1 86
13 27 61 71 E5 7B DA 8A 47 AC 99 37 03 CC E2 A1 CB 07 19 98 EC CB 32 7E F6 3C CE
A7))) - the key for Digital +
From version 2.20 of Nagra 2 keys have the AU on this coding system, but had
change of notation keys, which are now being identified literkami:
I - IDEA ECM key
P: - ECM key
M: - EMM key
Key IDEA ECM key is saved in the following format:
And: ((XX YY ZZ ZZ ZZ ... ...))
Where:
XX - the provider
YY - key number
ZZ - IDEA ECM key consisting of 16 bytes
Example:
I: (71 01 00 (0C CF 87 9B FE 90 A4 FF C6 64 A7 EB 51 54 F5 D9)) - a key 00 for
Cyfrowy Polsat
Key ECM key is saved in the following format:
P: (XX (YY YY YY YY ... ...))
Where:
XX - the provider
YY - ECM RSA key consists of 64 bytes
Example:
R: (71 01 (AB C5 7C FA 14 C4 14 A8 4C 3E B1 96 9F 5F 99 93 62 19 B4 85 E9 B9 6A 20
C3 31 95 63 C8 0D 13 74 3C CD DE DF 67 1B BE DC 9C 5D 31 EB A5 BA E2 60 42 39 C6
E7 07 29 E9 99 91 71 BD 0F FE 37 5F BA)) - RSA ECM for Polsat Cyfrowy
These two keys are sufficient to receive the provider.
If your provider has to be decoded automatically record key is needed to EMM,
that looks like this:
M: ((XX YY YY YY ... ... (ZZ ZZ ZZ ZZ ... ...)))
Where:
XX - the provider
YY - EMM IDEA key consisting of 16 bytes
ZZ - RSA EMM consists of 96 bytes
Example:
M: (71 01 (57 68 58 58 ED 62 82 07 76 9D B8 18 82 AD 75 B1 (4F CE 0C 37 E3 F5 08 C4
78 2B 16 E9 57 E2 13 89 8F DA 71 74 DF 5A 73 8A 9A 25 AE 7F 0D 84 84 94 4B 96 13 CF
F2 F6 70 1A 76 5C 36 B2 04 1D D9 18 F3 D8 D5 DA 47 74 B5 46 39 A6 64 E7 2B 36 CC 53
F8 1E C0 2F E1 8A 00 98 AE 17 83 DC C1 32 A7 AC B9 81 38 6A AB C1 D3 4C EF AB 27
A3 A6 8F 53 AE))) - for key EMM Cyfrowy Polsat
Seca (0100):
Seca keys in the system are saved in the format:
S: ((XX YY ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
XX - the provider
YY - key number
ZZ - the key consisting of 8 bytes
Example:
S: (00 65 0C (5A BC 23 DE 34 9B CA 5F)) - 0C key for Cyfra +
The system seca key 0E is the key and the system is stable, is to switch
between key 0C and 0D.
Keys 0C and 0D are key operational and serve to decode the ECM-s. Are changed in
monthly cycle of changes.
Gbox to automatically retrieve the keys need for an active couple consisting of PPUA and
MK1 key (key MasterKey1), which is written in the format:
M: (XX XX YY YY YY YY KK (ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
XX - the provider
YY - PPUA
KK - MK1 key number for the Primary is a value of 01, for the Secondary has a value 11
ZZ - MasterKey1
Example:
M: (00 65 00 06 15 21 01 (F0 01 C3 28 4E CC 32 07)) Cyfra + primary MK1
Via (05XX)
Viaccess1 keys in the system are saved in the format:
V: (00 (XX YY ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
00 - ending a system of identifying viaccess1 500
XX - the provider
YY - key number
ZZ - the key consisting of 8 bytes
Example:
V: (00 94 00 08 (23 ED 5A BC 34 9B CA 5F)) - a key 08 for SRG Swiss
Gbox to automatically retrieve the keys need for an active couple consisting of PPUA and
MK key (key masterkey), which is written in the format:
M: (00 XX XX YY YY YY YY KK (ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
00 - ending a system of identifying viaccess1 500
XX - the provider
YY - PPUA
KK - MK key number, in this case it may be the key 00, 01 or 04 (dependent on
Operator)
ZZ - masterkey
Example:
M: (00 94 00 00 C2 8D F0 67 00 (8B 09 62 03 A1 67 49 AA)) - SRG SSR
M: (00 94 00 00 C2 8D F0 67 01 (EB 6C 07 44 4B 32 B4 FE)) - SRG SSR
M: (00 94 00 00 C2 8D F0 67 04 (57 4B 23 9F FA 14 FB E2)) - SRG SSR
Viaccess2 keys in the system are saved in the format:
In: (01 (XX YY ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
01 - ending a system of identifying viaccess2 501
XX - provider
YY - key number
ZZ - the key consisting of 16 bytes
Example:
In: (01 94 10 08 (BE E9 EE 68 7D 6C 03 97 87 49 A4 FE 32 B5 67 D2)) - the key to the NTV
TPScrypt keys in the system are saved in the format:
T: (00 (XX ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ))
Where:
00 - ending a system of identifying viaccess1 500
XX - provider
ZZ - AES key consists of 16 bytes
Example:
T: (00 7C 00 (39 DF BD 8C 95 E0 C9 E5 49 99 82 47 24 D8 12 33)) - the key for TPS
Отговори с цитат
Следните потребители (7) благодарят на ТИНТИН за този полезен пост
heracle (09-11-2009), rumen (09-11-2009), thunderstorm6 (09-11-2009), Джак (09-11-2009), Крал Артур (09-11-2009), Ники (09-11-2009), Чавдар (01-01-2010)
Sponsored Links
VIVO Rent A Car  Вземи своят Vu+ сега!  SatPlus
Отговори

Съобщения от Devil M
VIVO Rent A Car  

Тагове
emulator, gbox, king, енциклопедия


Активни потребители разглеждащи тази тема в момента: 1 (0 членове и 1 гости)
 
Контрол над темата
Начин на разглеждане

Подобни теми
Тема Започнал темата Форум Отговори Последно мнение
Echosmart DSB-792 (CAS MODULE + EMULATOR + USB + LAN) Tiesto ECHOSMART инфо 0 08-10-2008 17:25
OPTICUM 7100 CX Plus (CAS MODULE + EMULATOR) mita4ka OPTICUM / GLOBO 10 29-03-2008 23:42


Всички времена са във формат GMT +3. Часът е 13:47.


DTV-BG Powered by vBulletin Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.