Проблем с Max800, oscam i conax na SatBg

[skycube]

Здравейте колеги,

Имам Мах800 с Nemesis 2.2 image, CCCam 2.2.1 и Oscam 1.00 build 5560. Вчера си купих карта на Satellite.bg и следвайки примера на Продуцента описан тук: http://www.dtv-bg.com/showthread.php?t=17152 при старт на дрийма, в лога на Оскама ми изписва ето това:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 02:01:04 2000
-------------------------------------------------------------------------------
01/01/2000 2:01:04 2AAC63C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5560 (mips-tuxbox-linux)
01/01/2000 2:01:04 2AAC63C0 s version=1.00-unstable_svn, build #5560, system=mips-tuxbox-linux, nice=-1
01/01/2000 2:01:04 2AAC63C0 s client max. idle=120 sec, debug level=0
01/01/2000 2:01:04 2AAC63C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
01/01/2000 2:01:04 2AAC63C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
01/01/2000 2:01:04 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:09 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:14 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:19 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:24 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:29 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:34 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:39 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
01/01/2000 2:01:44 2AAC63C0 s The current system time is smaller than the build date (Jul 7 2011). Waiting 5s for time to correct...
28/07/2011 7:24:22 2AAC63C0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
28/07/2011 7:24:22 2AAC63C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
28/07/2011 7:24:22 2AAC63C0 s signal handling initialized (type=sysv)
28/07/2011 7:24:22 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
28/07/2011 7:24:22 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
28/07/2011 7:24:22 2AAC63C0 s 939 provid's loaded
28/07/2011 7:24:22 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
28/07/2011 7:24:22 2AAC63C0 s monitor: disabled
28/07/2011 7:24:22 2AAC63C0 s camd33: disabled
28/07/2011 7:24:22 2AAC63C0 s camd35: disabled
28/07/2011 7:24:22 2AAC63C0 s cs378x: disabled
28/07/2011 7:24:22 2AAC63C0 s newcamd: disabled
28/07/2011 7:24:22 2AAC63C0 s radegast: disabled
28/07/2011 7:24:22 2AAC63C0 s http thread started
28/07/2011 7:24:22 2AAC63C0 s creating thread for device /dev/sci0
28/07/2011 7:24:22 2AAC63C0 s loadbalancer: can't read from file /tmp/.oscam/stat
28/07/2011 7:24:22 2AAC63C0 s waiting for local card init
28/07/2011 7:24:22 2C4BD4B0 h HTTP Server listening on port 8888
28/07/2011 7:24:22 2CCBD4B0 r reader thread started (thread=2CCBD4B0, label=local, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
28/07/2011 7:24:22 2CCBD4B0 r ERROR opening device /dev/sci0
28/07/2011 7:24:22 2CCBD4B0 r Cannot open device: /dev/sci0

.... след което когато ръчно от синия панел, спра CCCam-a, дам на Оскама да се рестартира, лога заприличва на това:

28/07/2011 7:31:48 2AAC63C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5560 (mips-tuxbox-linux)
28/07/2011 7:31:48 2AAC63C0 s version=1.00-unstable_svn, build #5560, system=mips-tuxbox-linux, nice=-1
28/07/2011 7:31:48 2AAC63C0 s client max. idle=120 sec, debug level=0
28/07/2011 7:31:48 2AAC63C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
28/07/2011 7:31:48 2AAC63C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
28/07/2011 7:31:48 2AAC63C0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
28/07/2011 7:31:48 2AAC63C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
28/07/2011 7:31:48 2AAC63C0 s signal handling initialized (type=sysv)
28/07/2011 7:31:48 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
28/07/2011 7:31:48 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
28/07/2011 7:31:48 2AAC63C0 s 939 provid's loaded
28/07/2011 7:31:48 2AAC63C0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
28/07/2011 7:31:48 2AAC63C0 s monitor: disabled
28/07/2011 7:31:48 2AAC63C0 s camd33: disabled
28/07/2011 7:31:48 2AAC63C0 s camd35: disabled
28/07/2011 7:31:48 2AAC63C0 s cs378x: disabled
28/07/2011 7:31:48 2AAC63C0 s newcamd: disabled
28/07/2011 7:31:48 2AAC63C0 s radegast: disabled
28/07/2011 7:31:48 2AAC63C0 s http thread started
28/07/2011 7:31:48 2AAC63C0 s creating thread for device /dev/sci0
28/07/2011 7:31:48 2AAC63C0 s loadbalancer: can't read from file /tmp/.oscam/stat
28/07/2011 7:31:48 2AAC63C0 s waiting for local card init
28/07/2011 7:31:48 2C4BD4B0 h HTTP Server listening on port 8888
28/07/2011 7:31:48 2CCBD4B0 r reader thread started (thread=2CCBD4B0, label=local, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
28/07/2011 7:31:48 2CCBD4B0 r local card detected
28/07/2011 7:31:50 2CCBD4B0 r ATR: 3B 34 94 00 30 42 30 30
28/07/2011 7:31:52 2CCBD4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
28/07/2011 7:31:53 2CCBD4B0 r type: Conax, caid: 0B01, serial: 2033006887, hex serial: 792d3927, card: v64
28/07/2011 7:31:53 2CCBD4B0 r Providers: 1
28/07/2011 7:31:53 2CCBD4B0 r Provider: 1 Provider-Id: 000000
28/07/2011 7:31:53 2CCBD4B0 r Provider: 1 SharedAddress: 00000000
28/07/2011 7:31:53 2CCBD4B0 r found cardsystem conax
28/07/2011 7:31:53 2CCBD4B0 r Package: 1, id: 1010, classes: 010FFFFF, date: 2011/07/20 - 2011/07/25, name: Preview1
28/07/2011 7:31:53 2CCBD4B0 r Package: 2, id: 1010, classes: 010FFFFF, date: 1990/01/01 - 1990/01/01, name: Preview1
28/07/2011 7:31:53 2CCBD4B0 r [conax-reader] ready for requests
28/07/2011 7:31:54 2AAC63C0 s init for all local cards done
28/07/2011 7:31:54 2AAC63C0 s anti cascading disabled
28/07/2011 7:31:54 2DCCD4B0 c plain dvbapi-client granted (dummy, au=on (1 reader))
28/07/2011 7:31:54 2DCCD4B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
28/07/2011 7:31:58 2DCCD4B0 c dvbapi: [ADD PID 0] CAID: 0B01 ECM_PID: 0226 PROVID: 000000
28/07/2011 7:31:58 2DCCD4B0 c dvbapi: [ADD PID 1] CAID: 0D06 ECM_PID: 0225 PROVID: 000000
28/07/2011 7:31:58 2DCCD4B0 c dvbapi: new program number: 1591 (0B01:1591 unknown)
28/07/2011 7:31:58 2CCBD4B0 r Error processing ecm for caid 0B01, srvid 1591 (servicename: 0B01:1591 unknown) on reader local.
28/07/2011 7:31:58 2DCCD4B0 c dummy (0B01&000000/1591/67:2FE8): not found (91 ms) by local (of 1 avail 1)
28/07/2011 7:31:58 2DCCD4B0 c dvbapi: try pids again #1
28/07/2011 7:31:58 2DCCD4B0 c dummy (0D06&0000C0/1591/B4:65BB): rejected group (0 ms) (of 0 avail 0) (no matching reader)
28/07/2011 7:31:58 2DCCD4B0 c dummy (0B01&000000/1591/67:2FE8): not found (0 ms) by local (of 1 avail 1)
28/07/2011 7:31:59 2DCCD4B0 c >> OSCam << cardserver log switched, version 1.00-unstable_svn, build #5560 (mips-tuxbox-linux)
28/07/2011 7:31:59 2DCCD4B0 c version=1.00-unstable_svn, build #5560, system=mips-tuxbox-linux, nice=-1
28/07/2011 7:31:59 2DCCD4B0 c client max. idle=120 sec, debug level=0
28/07/2011 7:31:59 2DCCD4B0 c max. logsize=10 Kb, loghistorysize=4096 bytes
28/07/2011 7:31:59 2DCCD4B0 c client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
28/07/2011 7:31:59 2DCCD4B0 c dvbapi: try pids again #2
28/07/2011 7:31:59 2DCCD4B0 c dummy (0D06&0000C0/1591/B4:65BB): rejected group (1 ms) (of 0 avail 0) (no matching reader)
28/07/2011 7:31:59 2DCCD4B0 c dummy (0B01&000000/1591/67:2FE8): not found (0 ms) by local (of 1 avail 1)
28/07/2011 7:31:59 2DCCD4B0 c dvbapi: try pids again #3
28/07/2011 7:31:59 2DCCD4B0 c dvbapi: can't decode channel
28/07/2011 7:31:59 2DCCD4B0 c dummy (0D06&0000C0/1591/B4:65BB): rejected group (0 ms) (of 0 avail 0) (no matching reader)

.... а телевизия няма

Очевидно греша някаде, но не знам къде... пробвах и конфигурацията дадена тук: http://www.dtv-bg.com/downloads.php?do=file&id=3504 но макар много да ми хареса идеята и тя не свърши работа... екрана пак си е черен.. борих се като прасе в теменужки цяла нощ понеже не съм много в час, но в крайна сметка се обръщам за помощ, защото мисля, че проблема е някъде другаде.. може ли някой да ме насочи? Благодаря предварително...

[бебезавър]

Провери дали са ти еднакви групите на рийдъра и на юзъра който ползваш в dvbapi секцията след като си спрял цецка картата според мен се чете.

[иван77]

Що ми се струва, че картата ти не е ъпдейтната...

[skycube]

Първоначално написано от иван77

Що ми се струва, че картата ти не е ъпдейтната...

и на мен ми направи впечатление, че нещо датите са странни... до 25.07.2011... а за това какво е решението??

[skycube]

Прав се оказа Ванката... картата имаше нужда от ъпдейт. След разходка до магазина и слагането й там в conax CA модул, всичко изгря, но без Penthouse HD-тата.. Някой сблъсквал ли се е с този проблем?

Конфига към момента е Oscam 1.00 rev.4396, CCCam v.2.1.3, като..

.. в oscam.conf

[global]
Nice = -10
WaitForCards = 1
PreferLocalCards = 1
saveinithistory = 1

[monitor]
port = 988
monlevel = 4
nocrypt = 127.0.0.1

[dvbapi]
enabled = 1
boxtype = dreambox
user = localuser
au = 1
PreferLocalCards = 1

[newcamd]
Key = 0102030405060708091011121314
Port = 34001@0B01:000000

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

.. в oscam.server

[reader]
label = SatBG
Protocol = internal
detect = CD
device = /dev/sci0
Group = 1
EMMCache = 1,3,2
caid = 0B01
ident = 0B01:000000

.. в oscam.user

[account]
user = test1
pwd = test2
group = 1
au = SatBG

[account]
user = localuser
group = 1
au = SatBG

... а в CCCam.cfg ето това:

SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
#WEBINFO USERNAME :
#WEBINFO PASSWORD :
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 34001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

както казах, всичко тръгна, но идея си нямам дали ще се ъпдейтва по този начин и защо Penthouse HD-тата не изгряват... в лога на Oscam когато съм избрал някой от тях изписва:

2011/07/28 13:40:04 2D5034B0 c test1 (0B01&000000/15E7/67:E349): not found (89 ms) (of 1 avail 1)
2011/07/28 13:40:10 2D5034B0 c test1 (0B01&000000/15E7/67:4889): not found (89 ms) (of 1 avail 1)
2011/07/28 13:40:21 2D5034B0 c test1 (0B01&000000/15E7/67:C344): not found (90 ms) (of 1 avail 1)
2011/07/28 13:40:37 2D5034B0 c test1 (0B01&000000/15E7/67:101B): not found (88 ms) (of 1 avail 1)
.. и т.н.

ако някой има идея, моля да сподели какво може да е решението.

[galiano]

Първоначално написано от skycube

Прав се оказа Ванката... картата имаше нужда от ъпдейт. След разходка до магазина и слагането й там в conax CA модул, всичко изгря, но без Penthouse HD-тата.. Някой сблъсквал ли се е с този проблем?

Конфига към момента е Oscam 1.00 rev.4396, CCCam v.2.1.3, като..

.. в oscam.conf
.. в oscam.server
.. в oscam.user
... а в CCCam.cfg ето това:
както казах, всичко тръгна, но идея си нямам дали ще се ъпдейтва по този начин и защо Penthouse HD-тата не изгряват... в лога на Oscam когато съм избрал някой от тях изписва:

ако някой има идея, моля да сподели какво може да е решението.

Добави към настройките на райдера това:

pincode                       = 0000

[skycube]

Първоначално написано от galiano

Добави към настройките на райдера това:
pincode = 0000

Евала!! Цар си, брат! всичко заспа.. така де - изгря!

м/у другото погледнах в webif-a на oscam-a и май се и ъпдейтва:



... или греша??

[vlad]

Щракни на READERS и виж какво пише на EMM written за картата. Ако е различно от 0/0/0/0, може и да се ъпдейтва.

[skycube]

Първоначално написано от vlad

Щракни на READERS и виж какво пише на EMM written за картата. Ако е различно от 0/0/0/0, може и да се ъпдейтва.

Ето какво излиза:

ще разбера на 1-ви Август дали ще остана изненадан

[Чък Норис]

Рестартирай оскама на първи сутринта и няма да имаш проблеми.